JK/JKU Rear Inner Fender Liner - Nemesis Industries
JK/JKU Rear Inner Fender Liner - Nemesis Industries
JK/JKU Rear Inner Fender Liner - Nemesis Industries
JK/JKU Rear Inner Fender Liner - Nemesis Industries
JK/JKU Rear Inner Fender Liner - Nemesis Industries
JK/JKU Rear Inner Fender Liner - Nemesis Industries
JK/JKU Rear Inner Fender Liner - Nemesis Industries
JK/JKU Rear Inner Fender Liner - Nemesis Industries

Install Time

Estimated 2.0 Hour Install

compaitable with

JK JKU

This may vary depending on experience

Download Install Guide

SKU: 126700

Instant access

PDF

JK/JKU Rear Inner Fender Liner

SKU# 126700

Regular price$299.00
/
Shipping calculated at checkout.
Finish Options
Bare
Semi-Gloss Black Powder Coat (Cardinal BK-08)
Textured Black Powder Coat (Cardinal BK-59)

Precision-designed and 100% Made in USA.

  • Expands the rear wheel-well opening while maintaining liner coverage on your JK or JKU.
  • Designed around usable wheel-well space, not just covering the area behind the tire.
  • Built from .090-inch 5052 aluminum.
  • Seamless finish, with each liner inspected for precision fit and finish.
  • Available in bare aluminum, semi-gloss black powder coat or textured black powder coat.
  • Built from .090" 5052 aluminum
  • Powder coat ready
  • Works with factory and most aftermarket fenders
  • Requires body trimming for additional clearance
  • Sold as a pair
  • Installation hardware included — need a replacement kit? 126700-02 Hardware Kit (JK/JKU Rear Inner Fender Liner) →

Install Time

Estimated 2.0 Hour Install

compaitable with

JK JKU

This may vary depending on experience

Download Install Guide

SKU: 126700

Instant access

PDF

More Room Inside the Rear Wheel Well

When you're planning a tire and suspension setup, the space inside the rear wheel well matters as much as what you can see from outside the Jeep. A liner needs to do more than make that space look finished. We designed our JK/JKU Rear Inner Fender Liner to expand the wheel-well opening while keeping coverage part of the design. That puts the useful space around the tire at the center of the product, rather than treating the liner as a finishing panel added after the rest of the build. The result is more room in the rear wheel well, with a liner that still covers it. That extra space is one part of your clearance plan, not a promise that any tire will fit. Wheel offset, suspension travel and the rest of your setup still determine how much room your particular Jeep needs.

Rear three-quarter view of a gray two-door Jeep with a rear inner fender liner visible above the tire.

Coverage Belongs in the Clearance Plan

Making more room in a wheel well and covering that wheel well are two different jobs. A rear liner has to account for both. If you only judge it by how it looks behind the tire, you're missing an important part of what you're buying. Our JK/JKU rear liner brings coverage and an expanded wheel-well opening into the same design. You get a lined rear wheel well without making appearance the whole reason for the upgrade. That's the distinction that matters when you're choosing parts for a build: the liner's coverage needs to be considered alongside the space it leaves available, not separately from it. We also inspect each liner for precision fit and finish, because the finished result still matters. The seamless finish completes the rear wheel well, but it's the combination of coverage and space that gives this liner its purpose.

Green Jeep climbing a rocky red-rock trail with its front suspension articulated.

Choose the Finish That Fits Your Build

Once you've chosen the liner for its coverage and wheel-well space, the next decision is how you want it finished. Every option starts with .090-inch 5052 aluminum, so choosing a finish doesn't mean choosing a different material. Bare aluminum is SKU 126700 and gives you the unfinished metal option if you're planning your own finish. For black powder coat, choose semi-gloss black, SKU 126701, or textured black, SKU 126702. The distinction is worth checking before you order, especially if you're coordinating the liners with parts already on your Jeep. Our semi-gloss black uses Cardinal BK-08, and our textured black uses Cardinal BK-59. Those codes give you a specific reference when planning the look of the build. Pick the finish that works with your other parts; the .090-inch aluminum, rear wheel-well coverage and expanded opening remain the reasons to choose the liner itself.

FITMENT GUIDE

COMPATIBLE VEHICLES:

• Jeep Wrangler JK (2 Door)
• Jeep Wrangler JKU (4 Door)

MODEL YEARS:

2007 - 2018

WEIGHT SHIPPED:

15 lbs

WEIGHT INSTALLED:

8 lbs

TOOLS REQUIRED:

INSTALL NOTES:

Level 3: Moderate

Requires mechanics tools. May require drilling and/or cutting. Specialized tools and removal of factory components may be required.

INSTALL NOTES:

Level 3: Moderate

Requires mechanics tools. May require drilling and/or cutting. Specialized tools and removal of factory components may be required.

FAQ

Frequently Asked Questions

This is the rear inner fender liner for Jeep Wrangler JK and JKU models. It is not the rear liner for the JL or JLU platform.

This is an inner liner for the rear wheel well, not an exterior fender flare. Its design combines rear wheel-well coverage with an expanded wheel-well opening.

Yes. Expanding the rear wheel-well opening while maintaining coverage is a central part of this liner’s design. It is intended to do more than finish the appearance of the wheel well.

There is no single tire-size guarantee. The liner expands the rear wheel-well opening, but wheel offset, suspension travel, bump stops and the rest of your setup also affect clearance. Evaluate the liner as part of your complete tire and suspension setup.

The JK/JKU Rear Inner Fender Liner is made from .090-inch 5052 aluminum. That material specification applies to all three finish options.

126700 is bare aluminum. 126701 is semi-gloss black powder coat using Cardinal BK-08. 126702 is textured black powder coat using Cardinal BK-59. Use the finish codes as a reference when coordinating with other parts.

Refer to the official Nemesis JK/JKU Rear Inner Fender Liner installation guide for the installation procedure and requirements. Review the guide for this product before planning the work.

Yes. Installation requires drilling two 1/4-inch holes per side through the liner into the Jeep’s wheel well. Remove the factory inner liner first if equipped; see the installation instructions for the complete procedure.