{"title":"Rear Bumpers","description":"\u003ch2\u003eHigh-Clearance Rear Protection \u0026amp; Tire Carriers\u003c\/h2\u003e\n\u003cp\u003eMaximize your Jeep's off-road capability with Nemesis Industries rear protection. Our bumpers are engineered to provide the industry’s best departure angles while maintaining the sophisticated, factory-plus aesthetic of the \u003cstrong\u003eJeep Wrangler (JL, JK, TJ)\u003c\/strong\u003e and \u003cstrong\u003eGladiator (JT)\u003c\/strong\u003e platforms.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eEngineered for the Trail\u003c\/h3\u003e\n\u003cp\u003eEvery bumper in this collection is designed to take the abuse of the rocks without adding unnecessary weight. From tight-fitting crawler bumpers to full-width protection, our designs focus on packaging and strength:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptimized Departure Angles:\u003c\/strong\u003e Tucked high and tight to ensure you clear obstacles that leave other bumpers hanging.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Formed Steel \u0026amp; Aluminum:\u003c\/strong\u003e Signature Nemesis styling that follows the body lines of your Jeep perfectly.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Recovery \u0026amp; Lighting:\u003c\/strong\u003e Most models feature heavy-duty shackle mounts and cutouts for auxiliary LED lighting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eJeep-Specific Solutions\u003c\/h3\u003e\n\u003cp\u003eWhether you need the ultra-stubby \u003cstrong\u003e\u003ca href=\"https:\/\/nemesis-industries.myshopify.com\/products\/jl-jlu-crawler-rear-bumper\"\u003eJL Crawler Rear Bumper\u003c\/a\u003e\u003c\/strong\u003e for maximum clearance or the \u003cstrong\u003e\u003ca href=\"https:\/\/nemesis-industries.myshopify.com\/products\/jt-outback-rear-bumper\"\u003eJT Outback\u003c\/a\u003e\u003c\/strong\u003e series for ultimate bed protection, our lineup is waterjet-cut and hand-finished in the USA.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eBrowse our full selection of rear bumpers and tire carriers below to find the perfect match for your build.\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"jk-jku-voyager-mid-width-rear-bumper-with-shackles-and-rigid-sr-m-light-cutouts","title":"JK\/JKU Voyager Mid Width Rear Bumper with Shackles and Rigid SR\/M Light Cutouts","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eBuild Specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNemesis's superior contruction\u003c\/li\u003e\n\u003cli\u003eBuilt from high strength 3\/16\" aluminum\u003c\/li\u003e\n\u003cli\u003eSeamless finish \u003c\/li\u003e\n\u003cli\u003eInspected for precision fit and finish to Nemesis's high standards, fits right the first time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSee the More Information tab above for complete part number listing along with additional fitment and sales information\u003c\/li\u003e\n\u003cli\u003eAvailable in raw, black or texured powdercoat\u003c\/li\u003e\n\u003cli\u003eCheck local lift laws for rules on tire coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e","brand":"Nemesis Industries","offers":[{"title":"Bare","offer_id":52718647181677,"sku":"121620-2","price":1049.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718647214445,"sku":"121621-2","price":1249.0,"currency_code":"USD","in_stock":true},{"title":"Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718647247213,"sku":"121622-2","price":1249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/files\/rear_bumper.png?v=1762976957"},{"product_id":"tj-tju-crawler-stubby-rear-bumper-w-shackle-mounts","title":"TJ\/LJ Crawler Stubby Rear Bumper w\/ Shackle Mounts","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eNemesis developed the Crawler Wrangler TJ rear bumper as a response to Nemesis customers asking us for a strong yet simple rear bumper that matches our Crawler front. The Crawler bumper's temper passed plate steel construction is designed withstand heavy abuse and handle just about any impact, protecting the frame from potential damage while providing very high clearance. The TJ Crawler bumper offers Nemesis's signature premium fit and finish, making it a good match to our signature aluminum fender flates and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eBuild Specs\u003c\/h2\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNemesis's superior contruction\u003c\/li\u003e\n\u003cli\u003eBuilt from high strength 3\/16\" ATSM A36 steel plate\u003c\/li\u003e\n\u003cli\u003eFormed and welded using Nemesis's proprietary manufacturing techniques using hand built custom tooling\u003c\/li\u003e\n\u003cli\u003eSeamless finish \u003c\/li\u003e\n\u003cli\u003eMaximum clearance possible \u003c\/li\u003e\n\u003cli\u003eNearly indestructible D-ring mounts\u003c\/li\u003e\n\u003cli\u003eInspected for precision fit and finish to Nemesis's high standards, fits right the first time\u003c\/li\u003e\n\u003cli\u003eFits 97-06 TJ and 04-06 TJ Unlimited (LJ) Wranglers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrilling is required\u003c\/li\u003e\n\u003cli\u003eAvailable in raw, black or texured powdercoat\u003c\/li\u003e\n\u003cli\u003eTire coverage is minimal, check local lift laws for rules on tire coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation can be handled by the average home installer, and can be completed in three hours for the pair, using basic hand tools and a drill. If you ever have a question during the installation process our skilled technicians will be available during business hours to answer any questions you may have.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e","brand":"Nemesis Industries","offers":[{"title":"Bare","offer_id":52718654292333,"sku":"101510","price":524.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718654325101,"sku":"101511","price":649.0,"currency_code":"USD","in_stock":true},{"title":"Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718654357869,"sku":"101512","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/files\/tjlj-crawler-stubby-rear-bumper-w-shackle-mounts-5265258.png?v=1774457180"},{"product_id":"jk-jku-odyssey-full-width-rear-bumper","title":"JK\/JKU Odyssey Full Width Rear Bumper","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eNemesis Odyssey Rear Bumpers are our premium full-width rear bumper for the Jeep JK Wranger. Like Nemesis aluminum front bumpers and fender flares, our rear bumpers are designed to be tough and lightweight, the Odessey rear bumpers only weigh 55 pounds! Their design is only made possible by being formed on our CNC press brake using our custom made dies and tooling. They are designed to have the same coverage as a factory JK rear bumper while providing a better depature angle with recessed corners, and are the perfect match to our Notorious rear fender flares or other full coverage rear fender flare.\u003c\/p\u003e\n\u003cp\u003eOdyssey Rear Bumpers are designed to clear most spare tire configurations, although with so many options out there additional modifications may be necassary to clear large spare tires. \u003c\/p\u003e\n\u003cp\u003eOptional openings for rear backup\/fog lights are available for either JW Speaker or Rigid style mounts. Check with a Nemesis sales rep if you have any questions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eBuild Specs\u003c\/h2\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNemesis's superior contruction\u003c\/li\u003e\n\u003cli\u003eBuilt from high strength 3\/16\" aluminum\u003c\/li\u003e\n\u003cli\u003eFormed and welded using Nemesis's proprietary manufacturing techniques using hand built custom tooling\u003c\/li\u003e\n\u003cli\u003eSeamless finish \u003c\/li\u003e\n\u003cli\u003eInspected for precision fit and finish to Nemesis's high standards, fits right the first time\u003c\/li\u003e\n\u003cli\u003eRecessed corners for excellent departure angles\u003c\/li\u003e\n\u003cli\u003eCompatible with factory tow package\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrilling is required\u003c\/li\u003e\n\u003cli\u003eAvailable in raw, black or texured powdercoat\u003c\/li\u003e\n\u003cli\u003eOptional rear openings for JW Speaker or Rigid driving lights\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation can be handled by the average home installer, and can be completed in three hours for the pair, using basic hand tools and a drill. If you ever have a question during the installation process our skilled technicians will be available during business hours to answer any questions you may have.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/sites\/default\/files\/Noto-Ody_Front_Flare_Install_Instructions_-_Rev._2_Final_0.pdf\" title=\"Installation PDF\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e","brand":"Nemesis Industries","offers":[{"title":"None \/ Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718654816621,"sku":"121412","price":1149.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Bare","offer_id":52718654849389,"sku":"121410","price":949.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718654882157,"sku":"121411","price":1149.0,"currency_code":"USD","in_stock":true},{"title":"Factory\/JW Speaker Fog Light \/ Bare","offer_id":52718654914925,"sku":"121420","price":949.0,"currency_code":"USD","in_stock":true},{"title":"Factory\/JW Speaker Fog Light \/ Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718654947693,"sku":"121421","price":1149.0,"currency_code":"USD","in_stock":true},{"title":"Factory\/JW Speaker Fog Light \/ Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718654980461,"sku":"121422","price":1149.0,"currency_code":"USD","in_stock":true},{"title":"Rigid \/ Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718655013229,"sku":"121432","price":1149.0,"currency_code":"USD","in_stock":true},{"title":"Rigid \/ Bare","offer_id":52718655045997,"sku":"121430","price":949.0,"currency_code":"USD","in_stock":true},{"title":"Rigid \/ Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718655078765,"sku":"121431","price":1149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/files\/jkjku-odyssey-full-width-rear-bumper-1035749.jpg?v=1774457182"},{"product_id":"jl-jlu-kelvin-mid-width-rear-bumper","title":"JL\/JLU Kelvin Mid\/Width Rear Bumper","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eBuild Specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNemesis's superior contruction\u003c\/li\u003e\n\u003cli\u003eBuilt from high strength 3\/16\" aluminum\u003c\/li\u003e\n\u003cli\u003eSeamless finish \u003c\/li\u003e\n\u003cli\u003eInspected for precision fit and finish to Nemesis's high standards, fits right the first time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSee the More Information tab above for complete part number listing along with additional fitment and sales information\u003c\/li\u003e\n\u003cli\u003eAvailable in raw, black or texured powdercoat\u003c\/li\u003e\n\u003cli\u003eCheck local lift laws for rules on tire coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e","brand":"Nemesis Industries","offers":[{"title":"No \/ Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718655144301,"sku":"141542","price":1249.0,"currency_code":"USD","in_stock":true},{"title":"No \/ Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718655177069,"sku":"141541","price":1249.0,"currency_code":"USD","in_stock":true},{"title":"No \/ Bare","offer_id":52718655209837,"sku":"141540","price":1049.0,"currency_code":"USD","in_stock":true},{"title":"Yes \/ Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718655242605,"sku":"141542-1","price":1249.0,"currency_code":"USD","in_stock":true},{"title":"Yes \/ Bare","offer_id":52718655275373,"sku":"141540-1","price":1049.0,"currency_code":"USD","in_stock":true},{"title":"Yes \/ Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718655308141,"sku":"141541-1","price":1249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/files\/jljlu-kelvin-midwidth-rear-bumper-8828133.jpg?v=1774457181"},{"product_id":"jk-jku-voyager-mid-width-rear-bumper","title":"JK\/JKU Voyager Mid\/Width Rear Bumper","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eNemesis Voyager Rear Bumpers are our premium mid-width rear bumper for the Jeep JK Wranger. Like Nemesis front bumpers and fender flares, our rear bumpers are designed to be tough and lightweight, the Voyager rear bumpers only weigh 35 pounds! Their design is only made possible by being formed on our CNC press brake using our custom made dies and tooling. They are designed to be flush with the body of the JK, and are a perfect high clearance option to run with Nemesis Crawler or Notorious Dovetail flares, or other narrow high clearance fender flare.\u003c\/p\u003e\n\u003cp\u003eVoyager Rear Bumpers are designed to clear most spare tire configurations, although with so many options out there additional modifications may be necassary to clear large spare tires. \u003c\/p\u003e\n\u003cp\u003eOptional openings for rear backup\/fog lights are available for either JW Speaker or Rigid style mounts. Check with a Nemesis sales rep if you have any questions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eBuild Specs\u003c\/h2\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNemesis's superior contruction\u003c\/li\u003e\n\u003cli\u003eBuilt from high strength 3\/16\" aluminum\u003c\/li\u003e\n\u003cli\u003eFormed and welded using Nemesis's proprietary manufacturing techniques using hand built custom tooling\u003c\/li\u003e\n\u003cli\u003eSeamless finish \u003c\/li\u003e\n\u003cli\u003eInspected for precision fit and finish to Nemesis's high standards, fits right the first time\u003c\/li\u003e\n\u003cli\u003eCompatible with factory tow package\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrilling is required\u003c\/li\u003e\n\u003cli\u003eAvailable in raw, black or texured powdercoat\u003c\/li\u003e\n\u003cli\u003eOptional rear openings for JW Speaker or Rigid driving lights\u003c\/li\u003e\n\u003cli\u003eTire coverage is minimal, check local lift laws for rules on tire coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation can be handled by the average home installer, and can be completed in three hours for the pair, using basic hand tools and a drill. If you ever have a question during the installation process our skilled technicians will be available during business hours to answer any questions you may have.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/sites\/default\/files\/Noto-Ody_Front_Flare_Install_Instructions_-_Rev._2_Final_0.pdf\" title=\"Installation PDF\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e","brand":"Nemesis Industries","offers":[{"title":"None \/ Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718655340909,"sku":"121512","price":1149.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Bare","offer_id":52718655373677,"sku":"121510","price":949.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718655406445,"sku":"121511","price":1149.0,"currency_code":"USD","in_stock":true},{"title":"Factory\/JW Speaker Fog Light \/ Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718655439213,"sku":"121521","price":1149.0,"currency_code":"USD","in_stock":true},{"title":"Factory\/JW Speaker Fog Light \/ Bare","offer_id":52718655471981,"sku":"121520","price":949.0,"currency_code":"USD","in_stock":true},{"title":"Factory\/JW Speaker Fog Light \/ Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718655504749,"sku":"121522","price":1149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/files\/jkjku-voyager-midwidth-rear-bumper-2885481.png?v=1774457179"},{"product_id":"jk-jku-helix-mid-width-rear-bumper","title":"JK\/JKU Helix Mid\/Width Rear Bumper","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Nemesis Helix JK Wrangler bumpers are the newest addtions to the Nemesis bumper family. Until now, we thought that one thing that was missing from the market is high clearance off road style bumpers that took the JK's factory body lines into account. \u003c\/p\u003e\n\u003cp\u003eThe Helix rear bumper would fall into the \"mid width\" category that begins and ends at factory body, but with several high clerance design features that follow the curvature of the JK's rear corners, creating a simple high clerance bumper that looks like it belongs there. The Helix rear bumper's incredibly light 25lb weight combined with Nemesis's signature aluminim construction, fit and finish make it the perfect bumper for the JK Wrangler that needs the high clearance of but still wants to maintain a sophistocated look.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild Specs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eNemesis's superior contruction\u003c\/li\u003e\n\u003cli\u003eBuilt from high strength 3\/16\" aluminum\u003c\/li\u003e\n\u003cli\u003eFormed and welded using Nemesis's proprietary manufacturing techniques using hand built custom tooling\u003c\/li\u003e\n\u003cli\u003eSeamless finish \u003c\/li\u003e\n\u003cli\u003eInspected for precision fit and finish to Nemesis's high standards, fits right the first time\u003c\/li\u003e\n\u003cli\u003eCompatible with factory tow package\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eDrilling is required\u003c\/li\u003e\n\u003cli\u003eAvailable in raw, black or texured powdercoat\u003c\/li\u003e\n\u003cli\u003eTire coverage is minimal, check local lift laws for rules on tire coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInstallation can be handled by the average home installer, and can be completed in three hours for the pair, using basic hand tools and a drill. If you ever have a question during the installation process our skilled technicians will be available during business hours to answer any questions you may have.\u003c\/p\u003e","brand":"Nemesis Industries","offers":[{"title":"Bare","offer_id":52718655570285,"sku":"121530","price":949.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718655603053,"sku":"121531","price":1149.0,"currency_code":"USD","in_stock":true},{"title":"Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718655635821,"sku":"121532","price":1149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/files\/jkjku-helix-midwidth-rear-bumper-6037368.png?v=1774457177"},{"product_id":"jl-jlu-crawler-rear-bumper","title":"JL\/JLU Crawler Rear Bumper","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eBuild Specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNemesis's superior contruction\u003c\/li\u003e\n\u003cli\u003eBuilt from high strength 3\/16\" aluminum\u003c\/li\u003e\n\u003cli\u003eSeamless finish \u003c\/li\u003e\n\u003cli\u003eInspected for precision fit and finish to Nemesis's high standards, fits right the first time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSee the More Information tab above for complete part number listing along with additional fitment and sales information\u003c\/li\u003e\n\u003cli\u003eAvailable in raw, black or texured powdercoat\u003c\/li\u003e\n\u003cli\u003eCheck local lift laws for rules on tire coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e","brand":"Nemesis Industries","offers":[{"title":"No \/ Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718657765741,"sku":"141611","price":749.0,"currency_code":"USD","in_stock":true},{"title":"No \/ Bare","offer_id":52718657798509,"sku":"141610","price":599.0,"currency_code":"USD","in_stock":true},{"title":"No \/ Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718657831277,"sku":"141612","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/files\/jljlu-crawler-rear-bumper-7347803.jpg?v=1774457174"},{"product_id":"jl-jlu-rear-bumper-trail-skirt","title":"JL\/JLU Rear Bumper Trail Skirt","description":"\u003ch2\u003eBEHIND THE DESIGN\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAfter designing our first bumper for the JL we were not happy with how the pinch seam of the body below the tailgate stood out behind the bumper. We originally thought about changing our bumpers to come up higher, more like the factory but that would have further limited the size tire you could put on the carrier. We decided that the best route would be to make a trim piece that would completely cover the area. This design would help protect the lower portion of the body and give owners another way to customize the look of their Jeep. By keeping the Trail Skirt independent from the bumper and directly attaching it to the body we are able to offer this product to customers with any aftermarket bumper not just ours.   \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe development of this product was not straightforward, the main hurdle was that the back corners of the Jeep have a radius that does not fit traditional tooling. Of course we could have used a step break process but that would have given a choppy look to the part. We wanted to maintain the curvature to the best of our ability so we spent the time to manufacture our own tooling for the press which allows us to precisely contour the piece to the body in a single hit so the part maintains a smooth arc around the corner. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe use of factory holes allows for a simple alignment while the majority of the install is handled using through bolts that are accessed by removing the tool tray from the cargo area. There are a few holes that do require the installation of nutserts however, these are installed at the end so there is little chance of misalignment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe Trail skirt is a great addition for any JL owner looking to clean up the back of their Wrangler.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Compatibility\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eCurrently we are unaware of any compatibility issues with this product\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIf you have questions about fitment with your specific build please contact us at \u003ca href=\"mailto:info@nem-ind.com\"\u003einfo@nem-ind.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecialty Tools Required to Complete the Installation\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eNutsert tool with a ¼” - 20 mandrel (Available under the tools section of the website)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e“W” size drill bit (Available under the tools section of the website)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003ePRODUCT NOTES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSee – MORE INFORMATION – located above, for detailed product specifications\u003c\/li\u003e\n\u003cli\u003eSee – INSTALL INSTRUCTION DOWNLOAD – located above, to download detailed instructions for this product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nemesis Industries","offers":[{"title":"Bare","offer_id":52718661861741,"sku":"142500","price":179.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718661894509,"sku":"142501","price":234.0,"currency_code":"USD","in_stock":true},{"title":"Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718661927277,"sku":"142502","price":234.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/files\/jljlu-rear-bumper-trail-skirt-2507458.jpg?v=1774457178"},{"product_id":"ultimate-receiver-saver-1","title":"Receiver Saver","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003ch2\u003e\u003cstrong\u003eBehind the Design\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIntroducing the Receiver Saver Line-up, cutting-edge products born from countless off-road adventures with our Jeep Gladiator’s. These thoughtfully designed solutions were developed to add another layer of protection to the rear of any off-road vehicle with a 2” receiver hitch, enabling them to conquer the most challenging terrains with maximum protection. The Slider boasts a robust 3\/16” A-36 steel construction, ensuring its ability to withstand punishment, safeguarding both your hitch and bumper during demanding situations. With two options available, you can select the one that best suits your specific application.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe Receiver Saver is a single-sided slider, designed to fit nearly all vehicles equipped with a 2” Receiver Hitch. By incorporating this product into your build, your vehicle gains enhanced protection during ledge departures and effortlessly glides through extreme climbs. Its steel surface and optimal approach\/departure angle work together to navigate over obstacles without damaging your receiver hitch or bumper.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe sole intention for the design of the Receiver Saver was protection. With this in mind we opted not to include a recovery point due to the potential risks associated with using a slider as a recovery tool. As with all Nemesis products designing a solution that fits the problem is key and we always want to ensure our customers have the best solutions for their offroading adventures. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eA non locking hitch pin is included with the receiver saver. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003ePRODUCT COMPATIBILITY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003eThis product is compatible with vehicles equipped with a 2\" Hitch Receiver\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eIf you have questions about fitment with your specific build please contact us at \u003ca href=\"mailto:info@nem-ind.com\"\u003einfo@nem-ind.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSPECIALTY TOOLS REQUIRED TO COMPLETE THE INSTALLATION\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003eThere are no specialty tools required to install this product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003ePRODUCT NOTES\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003eSee – The MORE INFORMATION Tab – located above, for detailed product specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Nemesis Industries","offers":[{"title":"Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718663532909,"sku":"858112","price":174.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/files\/universal-hitch-receiver-saver-4110713.jpg?v=1772054000"},{"product_id":"ultimate-receiver-saver","title":"Ultimate Receiver Saver","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003ch2\u003e\u003cstrong\u003eBehind the Design\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIntroducing the Receiver Saver Line-up, a cutting-edge product born from countless off-road adventures with our Jeep Gladiator’s. These meticulously designed solutions were developed to add another layer of protection to the rear of any off-road vehicle with a 2” receiver hitch, enabling them to conquer the most challenging terrains with maximum protection. The Slider boasts a robust 3\/16” A-36 steel construction, ensuring its ability to withstand punishment, safeguarding both your hitch and bumper during demanding situations. With two options available, you can select the one that best suits your specific application.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor those seeking the pinnacle of off-road resilience, we proudly present the Ultimate Receiver Saver. This dual-sided design features an approach\/departure ramp on both the front and back sides of the hitch, tailor-made for long vehicles like the Jeep Gladiator being used in the most demanding circumstances. Whether your hitch is dragged through rough terrains, confronted with obstacles, or navigating departures, this product ensures seamless lift and sliding over obstructions, all while ensuring exceptional protection. Glide confidently through the toughest of terrains, knowing your vehicle remains protected throughout the journey.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe sole intention for the design of the Ultimate Receiver Saver was protection. With this in mind we opted not to include a recovery point due to the potential risks associated with using a slider as a recovery tool. As with all Nemesis products designing a solution that fits the problem is key and we always want to ensure our customers have the best solutions for their offroading adventures. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eA non locking hitch pin is included with the receiver saver. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Compatibility\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis product is compatible with vehicles equipped with a 2\" Hitch Receiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"font-weight: 400;\"\u003eIf you have questions about fitment with your specific build please contact us at \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003ca href=\"mailto:info@nem-ind.com\"\u003einfo@nem-ind.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecialty Tools Required to Complete the Installation\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eThere are no specialty tools required to install this product\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Notes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSee – The MORE INFORMATION Tab – located above, for detailed product specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Nemesis Industries","offers":[{"title":"Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718663762285,"sku":"858102","price":224.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/files\/universal-ultimate-hitch-receiver-saver-6511411.jpg?v=1772053998"},{"product_id":"jt-outback-rear-bumper","title":"JT Outback Rear Bumper","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003ch2\u003e\u003cstrong\u003eBEHIND THE DESIGN\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIf you are looking for a bumper that breaks the mold then look no further than the Outback rear bumper for the Jeep Gladiator. We pushed away from our traditional styling to design a bumper that flows with the rounded corners of the Gladiator bed giving the bumper a timeless styling unlike anything else on the market.  The slim profile and aluminum construction adds additional clearance while decreasing weight over the factory bumper and helps create a streamlined appearance that definitely stands out from the rest.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe Outback bumper is designed to work seamlessly with the factory hitch, sensors, tow hooks, and license plate lights preserving the full functionality of your vehicle without any compromises. The license plate lights are set flush with the face of the bumper to keep them out of harm's way and the sensors plug directly into the new mounts. If you do not have sensors we provide caps to cover the sensor holes. Maintaining the factory tow hooks was a key design element in the development of this bumper. For customers with a single tow hook a second one is available on our site for purchase. The pocket that the tow hook sits in is kept tight to help keep tow straps from sliding during use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eBy designing with the home installer in mind we worked to keep the install as straightforward as possible. The support system on the back of the bumper has built in zip tie locations and holes for the factory fir trees to be reused and all the sensor locations work with the factory harness lengths eliminating any re-wiring. There is one piece of sheet metal on the hitch cover that does have to be trimmed however that can be handled with a cut off wheel or saw and does not require precise measuring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe Outback bumper will give your Jeep Gladiator strength, style, and uncompromised performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003ePRODUCT COMPATIBILITY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003eOEM Bed Slider not compatible\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eJT Outback Bed Sliders Add On Kit (sku 16782*-1)\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eJT Outback Rear Bumper Kit With Bed Sliders (sku 16141*-1)\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eIf you have questions about fitment with your specific build please contact us at \u003ca href=\"mailto:info@nem-ind.com\"\u003einfo@nem-ind.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003ePRODUCT NOTES\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003eSee – The MORE INFORMATION Tab – located above, for detailed product specifications\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eSee – The INSTALL INSTRUCTION DOWNLOAD tab – located above, to download detailed instructions for this product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Nemesis Industries","offers":[{"title":"Bare","offer_id":52718664843629,"sku":"161410","price":1149.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718664876397,"sku":"161411","price":1349.0,"currency_code":"USD","in_stock":true},{"title":"Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718664909165,"sku":"161412","price":1349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/files\/jt-outback-rear-bumper-8105294.jpg?v=1772053996"},{"product_id":"jt-outback-rear-bumper-with-bed-sliders","title":"JT Outback Rear Bumper With Bed Sliders","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003ch2\u003e\u003cstrong\u003eBEHIND THE DESIGN\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIf you are looking for a bumper that breaks the mold then look no further than the Outback rear bumper for the Jeep Gladiator. We pushed away from our traditional styling to design a bumper that flows with the rounded corners of the Gladiator bed giving the bumper a timeless styling unlike anything else on the market.  The slim profile and aluminum construction adds additional clearance while decreasing weight over the factory bumper and helps create a streamlined appearance that definitely stands out from the rest.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe Outback bumper is designed to work seamlessly with the factory hitch, sensors, tow hooks, and license plate lights preserving the full functionality of your vehicle without any compromises. The license plate lights are set flush with the face of the bumper to keep them out of harm's way and the sensors plug directly into the new mounts. If you do not have sensors we provide caps to cover the sensor holes. Maintaining the factory tow hooks was a key design element in the development of this bumper. For customers with a single tow hook a second one is available on our site for purchase. The pocket that the tow hook sits in is kept tight to help keep tow straps from sliding during use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor those looking for even more protection we designed a bed slider that perfectly compliments the rounded corners of the bumper. The slider is constructed of .1875” and .250” A-36 steel and 1.75” x .120 wall DOM tubing giving this slider uncompromised strength. In order to ensure the slider has the foundation to stand up to the rigors of extreme trail abuse we also built an entirely new mount that ties the slider to the frame. The frame mount uses all the factory holes for installation so no drilling is required. To help fine tune the install of the slider left enough adjustability in the mount and slider to allow for tailored alignment to the bumper.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eBy designing with the home installer in mind we worked to keep the install as straightforward as possible. The support system on the back of the bumper has built in zip tie locations and holes for the factory fir trees to be reused and all the sensor locations work with the factory harness lengths eliminating any re-wiring. There is one piece of sheet metal on the hitch cover that does have to be trimmed however that can be handled with a cut off wheel or saw and does not require precise measuring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe Outback bumper will give your Jeep Gladiator strength, style, and uncompromised performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003ePRODUCT COMPATIBILITY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003eCurrently we are unaware of any compatibility issues with this product\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eIf you have questions about fitment with your specific build please contact us at \u003ca href=\"mailto:info@nem-ind.com\"\u003einfo@nem-ind.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003ePRODUCT NOTES\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003eSee – The MORE INFORMATION Tab – located above, for detailed product specifications\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eSee – The INSTALL INSTRUCTION DOWNLOAD tab – located above, to download detailed instructions for this product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Nemesis Industries","offers":[{"title":"Bare","offer_id":52718665531757,"sku":"161410-1","price":1699.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718665564525,"sku":"161411-1","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718665597293,"sku":"161412-1","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/files\/jt-outback-rear-bumper-with-bed-sliders-3568524.jpg?v=1772054014"},{"product_id":"jt-outback-bed-slider","title":"JT Outback Bed Slider","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003ch2\u003e\u003cstrong\u003eBEHIND THE DESIGN\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor those looking for even more protection with the JT Outback Rear Bumper we designed a Bed Slider Add On Kit that perfectly compliments the rounded corners of the Nemesis bumper. The slider is constructed of .1875” and .250” A-36 steel and 1.75” x .120 wall DOM tubing giving this slider uncompromised strength. In order to ensure the slider has the foundation to stand up to the rigors of extreme trail abuse we also built an entirely new mount that ties the slider to the frame. The frame mount uses all the factory holes for installation so no drilling is required. To help fine tune the install of the slider left enough adjustability in the mount and slider to allow for tailored alignment to the bumper.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003ePRODUCT COMPATIBILITY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003eFor use with Nemesis Industries JT Outback Rear Bumper ONLY (sku 16141*)\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eIf you have questions about fitment with your specific build please contact us at \u003ca href=\"mailto:info@nem-ind.com\"\u003einfo@nem-ind.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003ePRODUCT NOTES\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003eSee – The MORE INFORMATION Tab – located above, for detailed product specifications\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eSee – The INSTALL INSTRUCTION DOWNLOAD tab – located above, to download detailed instructions for this product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Nemesis Industries","offers":[{"title":"Bare","offer_id":52718665630061,"sku":"167820-1","price":649.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718665662829,"sku":"167821-1","price":799.0,"currency_code":"USD","in_stock":true},{"title":"Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718665695597,"sku":"167822-1","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/files\/jt-outback-bed-slider-8015670.jpg?v=1772053994"},{"product_id":"jk-jku-octa-chop-rear-bumper","title":"JK\/JKU Octa Chop Rear Bumper","description":"","brand":"Nemesis Industries","offers":[{"title":"Bare","offer_id":52718669136237,"sku":"121550","price":899.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss Black Powder Coat  (Cardinal BK-08)","offer_id":52718669169005,"sku":"121551","price":1099.0,"currency_code":"USD","in_stock":true},{"title":"Textured Black Powder Coat (Cardinal BK-59)","offer_id":52718669201773,"sku":"121552","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/files\/jkjku-octa-chop-rear-bumper-7459605.jpg?v=1772053941"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/0106\/5325\/collections\/rear-bumpers-7234132.png?v=1774456768","url":"https:\/\/www.nem-ind.com\/collections\/rear-bumpers.oembed","provider":"Nemesis Industries","version":"1.0","type":"link"}